RoboTorch Parts

If you have access to being able to cut, drill, tap and weld the steel materials required to build this machine: The first four (4) fabricated parts are important to purchase when using the RoboTorch design (Motor Mounts, Truck Bearing Mount, Motor/Bearing Brackets and End Plates are specialty parts).

The Rack Mount, Carriage and Gantry Jigs are recommended also to be purchased for proper alignmenting and trueing of parts prior to welding. The Carriage Jig Plates can work for the Gantry Jig Plates by trueing, then clamping, one end of the gantry at a time.

The remaining parts can be cut from the specified materials to the sizes given, holes drilled and tapped where needed. All the steel materials used should be easily accessible in most areas. This cuts down on the costs for shipping and handling considering the weight of steel.

Having the ability to go this way, you will need to purchase the RT-HRDWR-FAB Kit, the Jigs and the EMC-XYYB-BX-K3 Kit. Then of course the Plasma Torch, power supply and the PC Computer with Pentium DX Processor or better with 2 megabytes of system RAM and 2 Megabytes Hard Disk space.


Motor Mount - 3.625" x 2.4375" x 0.25", fabricated from 0.25" phenolic. Three (3) required. Four holes for attaching the motor. Two holes for mounting to the MB bracket (one larger for aligning). Hole for the motor is countersunk to better secure the motor.Truck Bearing Mount - 3.625" x 1.5" x 0.25", fabricated from 0.25" phenolic. One (1) required. One center hole for attaching the main bearing assembly. Two holes for mounting to the MB bracket (one larger for aligning) to the carriage.
Motor/Bearing Bracket (MB bracket) - 1" x 1" x 0.125" @ 10" length, fabricated from 0.125" angle iron. Four (4) required. Four holes to accommodate two different size bearings. Two holes for mounting each motor mount and the truck bearing mount (with two holes for the bottom two screws securing the motor to the motor mount).End Plate - 10" x 2" x 0.125", fabricated from 0.125" flat steel. Four (4) required. One used at each end of the gantry and carriage.
Clamping Plate - 2" x 1" x 0.125", fabricated from 0.125" flat steel. Three (3) required. Part of the Roller & Clamping assemblies.Roller Plate - 2" x 2.5" x 0.125", fabricated from 0.125" flat steel. Three (3) required. Part of the Roller & Clamping assemblies.
Trigger Bracket - 1" x 1" x 0.125", fabricated from 0.125" angle iron. One (1) required. Welded to the gantry to engage the x axis limit switch.Limit Switch Bracket - 0.75" x 0.75" x 0.125", fabricated from 0.125" angle iron. Three (3) required. One welded on the carriage and two on the gantry.
Trigger Plate - 2.125" x 2" x 0.125", fabricated from 0.125" flat steel. Two (2) required. Welded at the ends of the Y rails for engaging the y axislimit switches.Z Axis Manual - 2" x 2" x 0.125", fabricated from 0.125" Angle iron. Two (2) required. Part of the Z axis bracket assembly.
Z Axis Manual angle Bracket - .75" x .75" x 0.125", fabricated from 0.125" Angle iron. Two (2) required. Part of the Z axis bracket assembly.Z Axis Bracket Plate - 2" x 2" x 0.125", fabricated from 0.125" flat steel. One (1) required. Part of the Z axis bracket assembly.
Z Axis Outside Tubing - 1.25" x 1.25" x 0.125" @2", fabricated from 0.125" steel tube. One (1) required. Part of the Z axis bracket assembly.Z Axis Inside Tubing - 1" x 1" x 0.0625" @ 10.5", fabricated from 0.0625" steel tube. One (1) required. Part of the Z axis bracket assembly.
Torch Bracket - 1" x 1" x 0.125" @8", fabricated from 0.125" Angle iron. One (1) required. Part of the Z axis bracket assembly.Rack Mount Jig - Fabricated from 0.25" phenolic. Two (2) required. Used to align the racks on the x and y rails.
Carriage Jig Plate - 9.5" x 3" x 0.75", fabricated from 0.75" melamine. Two (2) required. Used to true the carriage assembly for welding.Gantry Jig Plate - 4" x 3" x 0.75", fabricated from 0.75" melamine. Four (4) required. Used to true the gantry assembly for welding.
RoboTorch Parts Prices
RT-MMRT-TBMRT-10-AA
RT-EPRT-CPRT-RP
RT-TRG-BRKRT-LS-BRKRT-TRG-PLT
RT-ZAMRT-Z-ANG-BRKRT-Z-BRK
RT-Z-OTRT-Z-ITRT-T-BRK
RT-RMJRT-CJPRT-GJP

Click on CheckBox to include in Order
- Click on 'AddToCart' to Create New Order or Add Item
RoboTorch Pictures Torch Tables Kits Assembly Renderings Parts


Home Page at http://www.super-tech.com

http://www.super-tech.com/root/grp.asp?p1=RoboTorch-Parts
Copyright 2016 Dennis Bohlke
Revised 03/12/16