Pictures of Desktop CNC Taig Mill with Brushed DC Servo Motors

Taig Mill with Servo Motors Attached

Taig Mill with Servo Motors Attached

Taig Mill with Servo Motors Attached

This shows the Z axis servo motor.

This picture shows the X Servo Motor and the attached Limit Switch.

Y Servo Motor and the attached Limit Switch.

The servo motors with the adapter plate that mates the servo motors to the mill.

Gecko Powered Servor Motor Controller, Cables, CamPod and SuperCamXp CD

Connections to the CNC Controller.

This shows the end of the Y Lead Screw without the Servo motor Mounted.

This shows the Z axis limit switch and the spindle motor On/Off switch.

This is a picture looking under the Table Saddle. It shows the Brass Y-Nut on the Y Lead Screw. The are allen head screws to adjust the tension of the nut to the lead screw.

This is text engrave with a high relief of 0.125 inches in aluminum plate.
  




Home Page at http://www.super-tech.com

http://www.super-tech.com/root/grp.asp?p1=ServoMill-PIX
Copyright 2016 Dennis Bohlke
Revised 03/12/16