SuperCamXp-GraphicsInfo-ExpGcode
Export Gcode Configuration

This configures what kind of G and M codes will be generated when exporting drawings to create G-code files.


Select Tool this is the code that will select the tool at the beginning of the file.

Lead In this is the code that will lead into the body of the code.

Rapid Travel this is the code for rapid travel.

Cutting this is the code for cutting type motions.

Point Drill this is the code for drilling a point.

Arc CW this is the code for a Clock Wise arc.

Arc CCW this is the code for a Counter Clock Wise arc.

File Start this what will be put on the first line of the G-code file.

File End this is what will be put on the last line of the G-code file.

Spindle On this is the code for turning ON the spindle or the torch.

Spindle Off this is the code for turning OFF the spindle or the torch.

Machine Type this is the type of machine the code will be created for. Note that changing are made by clicking on the text box.

Line Numbers when checked line numbers will be included with the generated code.

Verbose Comments when checked there will be many comments added to the code.

Apply when clicked the changes made are applied.





ArmPod SuperCamXp Installation USB Driver Installation Make Acrylic Panel
Screens SideBar Menu USB Control Main Form



Home Page at http://www.super-tech.com

http://www.super-tech.com/root/grp.asp?p1=SuperCamXp-GraphicsInfo-ExpGcode
Copyright 2016 Dennis Bohlke
Revised 03/12/16