CNC Retrofit for Micro Mills TresServo CNC Machine Tool Motor Controller
CNC Motor Controller
* Controller and Motors are used in Part Number: Taig-3000-LBTS
* USB interface to the Host Windows Computer
* Internal Power Supply of 25 Volts, 6 Ampere, 120 or 240 VAC input.
* PWM with PID motor tuning
* Current Overload and Position Error Faults
* Relay Power Control for Spindle Motor and Auxilary Device.
* Single DB15 Connector for each Motor.
* Custom Motor Cables Six(6) feet long for each Motor.
SuperCamXp for USB control is included.
Encoders are 500 Clock Pulses per Revolution.
Provides 2000 increments per revolution of movement resolution.
Full feedback to Host system Graphics Display.
Real Time Animation of machine movements.

CNC Retrofit Bundle for Desktop Micro Mills, Taig and SherlinePart# TresServo-K3  CNC MicroMill Controller and Three(3) Brushed DC Servo Motors with Encoders and Six(6) Foot Motor Cables, and SuperCamXp for the USB interface. Each motor includes a crush proof Limit Switch.   Weight: 28 lbs........$1,495.00
Taig Micro Mill with Servo Motors for Coordinate Movements, Fast, Smooth, Accurate, Dependable and ReliablePart# TAIG-3000-LBTS  Taig Micro Mill with ER16 Spindle and Three DC servomotors, 500 line encoder, 0.000025 inch / 0.0000635 meter movement increments on all three axis. Includes:TresServo Motor Controller with internal Power Supply; USB Interface with the SuperCamXp program which is included, Three Servo Motor Cables and a USB Cable, TAIG accessories - Milling Vise, 2 End Mills, ER Collet Set - 3/8, 5/16, 1/4, 3/16, 1/8, 1/16 inch   Weight: 122 lbs........$2,995.00

Click on CheckBox to include in Order
- Click on 'AddToCart' to Create New Order or Add Item
Pictures of the motors and cables

Fully Assembled PFET TresServo Board. USB Input.
18 VAC and 9 VAC power input for Transformer.
Two 10 Ampere Relays.
Home Limit Switch Circuit for Each Motor.
Encoders and Armature Power in DB15 Connector.

Parallel Port Connector Pin Signals Schematic

Servo Motor Connector Pin Signals Schematic

Home Page at
Copyright 2016 Dennis Bohlke
Revised 03/12/16