Multi Axis Usb Motor Controller with bipolar stepper motor interface.
Drives 3 Motors, the two Y axis motors are synchronized.
There are separate female DB9 connectors for each X, Y1 and Y2 stepper motor.
Each stepper motor has a trim pot for adjusting motor phase current.
There is a Home Limit Switch circuit for each stepper motor.
The two relays are dry contract type and can be used to control items such as a Spindle Motors, Plasma Torch, Laser and Coolant on/off. The maximum contact switching current is 10 Ampere.
There are two connector panel styles. The connector panel can have either power recepticals for the main input AC or a terminal block with the Normally Open relay contacts presented.
Two fans with grill and foam filter provide forced air cooling.
The internal power supply provides 24 Volts at maximum current draw of 6.5 Ampere.
The controller is housed in a steel utility box painted grey. The steel box dimensions are: Height 4" x Width 10" x Length 10".
The motor controller has a thirty day warranty.
Shipping Weight is about 14 lbs.