USB CNC XYY Micro Stepping Controller, Two(2) Y axis Motors are Synchronized

USB CNC Plug and Play compatible with Windows XP, Windows 7 and Vista!

USB CNC Plug and Play compatible with Windows XP and Vista

Multi Axis Usb Motor Controller with unipolar stepper motor interface.

Drives 3 Motors, the two Y motors are synchronized.

There are separate female DB9 connectors for each X, Y stepper motor.

Each stepper motor has a trim pot for adjusting motor phase current.

There is a Home Limit Switch circuit for each stepper motor.

The two relays are dry contract type and can be used to control items such as a Spindle Motors, Plasma Torch, Laser and Coolant on/off. The maximum contact switching current is 10 Ampere.

There are two connector panel styles. The connector panel can have either power recepticals for the main input AC or a terminal block with the Normally Open relay contacts presented.

Foam filters air vents prevent fine metal parts from entering the box.

The internal power supply provides 24 Volts at maximum current draw of 6.5 Ampere.

The controller is housed in a steel utility box painted grey. The steel box dimensions are: Height 4" x Width 10" x Length 10".

The motor controller has a thirty day warranty.

Shipping Weight is about 14 lbs.
Price List
Three(3) Motors, Two(2) Axis, Y motors Synchronized Micro Stepping CNC Controller KitPart# USB-XYY-MUBT-K3  XYY, USB, Unipolar, 1600 Step/Rev, 3 Amp., Micro Step Motor Controller two(2) axis, drives four Unipolar motors. The two Y motors are synchronized. Two(2) Relays with Contacts presented on Terminal Block on the Connector Panel. Internal power supply, 24 Volt, 6.5 Amp., 150 Watt, 120/240 switchable. With SuperCamXp. USB interface with SuperCamXp. Three(3) motors and the cables included. USB cable included with controller. In metal utility box 10 x 10 x 4 inches.   Weight: 25 lbs........$1,295.00

Click on CheckBox to include in Order
- Click on 'AddToCart' to Create New Order or Add Item


Home Page at http://www.super-tech.com

http://www.super-tech.com/root/grp.asp?p1=USB-XYYMU
Copyright 2016 Dennis Bohlke
Revised 03/12/16