USB Interfaced Four(4) Motor Micro Stepping CNC XYZ Machine Control

USB CNC Plug and Play compatible with Windows XP, Windows 7 and Vista!

Multi Axis Usb Motor Controller with unipolar stepper motor interface.

Drives 4 Motors, Two are synchronized for Gantry driven with two motors.

There are separate female DB9 connectors for each X, Y and Z stepper motor.

Each stepper motor has a trim pot for adjusting motor phase current.

There is a Home Limit Switch circuit for each stepper motor.

The two relays are dry contract type and can be used to control items such as a Spindle Motors, Plasma Torch, Laser and Coolant on/off. The maximum contact switching current is 10 Ampere.

There are two connector panel styles. The connector panel can have either power recepticals for the main input AC or a terminal block with the Normally Open relay contacts presented.

Two fans with grill and foam filter provide forced air cooling.

The internal power supply provides 24 Volts at maximum current draw of 6.5 Ampere.

The controller is housed in a steel utility box painted grey. The steel box dimensions are: Height 4" x Width 10" x Length 10".

The motor controller has a thirty day warranty.

Shipping Weight is about 14 lbs.
USB XYYZ Micro Stepping Controller Prices
PN#USB-XYYZ-MUBX-K4, Three(3) Axis, Four(4) Motor Micro Stepping Controller KitPart# USB-XYYZ-MUBX-K4  XYYZ, USB, Unipolar, 1600 Step/Rev, 3 Amp., Micro Step Motor Controller, three axis, drives four Unipolar motors, the two Y motors are synchronized. Two(2) Relay Controlled Main Power Recepticals. With SuperCamXp. Internal Power Supply, 24 Volt, 6.5 Amp., 150 Watt, 120/240 Switchable. USB interface with SuperCamXp. Four(4) motors and the cables included. USB cable included with controller. In metal utility box 10 x 10 x 4 inches.   Weight: 29 lbs........$1,495.00

Click on CheckBox to include in Order
- Click on 'AddToCart' to Create New Order or Add Item

Home Page at
Copyright 2016 Dennis Bohlke
Revised 03/12/16