Taig-200-48 Headstock Dovetail Mounting Plate drilled with mounting hole pattern

Taig Tools Part Number 200-48 Headstock Dovetail Mounting Plate drilled with mounting hole pattern
Length of Plate is 4 1/2 inches
Eight(8) Holes for Machine Screws, Pilot drilled to hide the Head
Holes are 1 inch square pattern
Four(4) Screws #10-32 X 5/8 Inch Included.

Taig-200-48 Headstock Dovetail Mounting Plate drilled with mounting hole pattern

Taig-200-48 Headstock Dovetail Mounting Plate drilled with mounting hole pattern

Headstock Dovetail Mounting Plate drilled with mounting hole pattern.Part# TAIG-200-48  Headstock Dovetail Mounting Plate drilled with mounting hole pattern.........$6.00
Taig Tools Micro Lathe Complete SpindlePart# TAIG-100-00  Complete Headstock for the Taig Lathe. It uses the original Taig Colets. It can also be used as a mill headstock.   Weight: 3.5 lbs........$63.90

Click on CheckBox to include in Order
- Click on 'AddToCart' to Create New Order or Add Item


Home Page at http://www.super-tech.com

http://www.super-tech.com/root/grp.asp?p1=taig-200-48
Copyright 2016 Dennis Bohlke
Revised 03/12/16