Super Tech & Associates Main Price List Page

Super Tech & Associates Main Price List

Search Phrase

Click on CheckBox to include in Order
- Click on 'AddToCart' to Create New Order or Add Item
Sorted on Part Number
   
Desktop CNC Machine Tool Controllers for Servo and Stepper Motors Part# BIT-M12515-015 Engraving Cutter Carbide 1/8 X 1-1/2", Tip @ .015   Weight: 0.05 lbs........$24.00
Desktop CNC Machine Tool Controllers for Servo and Stepper Motors Part# BIT-M12515-030 Engraving Cutter Carbide 1/8 X 1-1/2", Tip @ .030   Weight: 0.05 lbs........$24.00
Desktop CNC Machine Tool Controllers for Servo and Stepper Motors Part# BIT-M12515-060 Engraving Cutter Carbide 1/8 X 1-1/2", Tip @ .060   Weight: 0.05 lbs........$24.00
CNC Stepper Motor Cable, Light Duty Part# CBL-DB9MF-3M 9 Pin DB Cable, Male/Female Connectors, 3 Meters Long........$15.95
Part# EMC-XXYY-MUBT-K4 XYYZ, Unipolar, 1600 Step/Rev, 3 Amp., Four(4) Motor, Two Independent XY sets of Motors, Step Motor Controller. Internal 24 Volt 6.5 Amp. power supply, 150 Watt 120/240 switchable. Parallel Port step and direction Interface. In metal utility box 10 x 10 x 4 inches. Four(4) motors and the cables included.   Weight: 28 lbs........$1,495.00
Products/EMC/EMC-XYAZ-MUBT Part# EMC-XYAZ-MUBT XYAZ, Unipolar, 1600 Step/Rev, 3 Amp., Four(4) Motor, Four(4) Axis, Micro Step Motor Controller. Two Relays with 10A rated contracts, terminal block connections on connector panel. Internal 24 Volt 6.5 Amp. Power supply, 150 Watt 120/240 switchable. Parallel Port step and direction Interface, compatible with Mach3. In metal utility box 10 x 10 x 4 inches.   Weight: 12 lbs........$995.00
Part# EMC-XYAZ-MUBX XYAZ, Unipolar, 1600 Step/Rev, 3 Amp., Four(4) Motor, Four(4) Axis, Step Motor Controller. Two Relays with 10A rated contracts, control main power recepticals on connector panel. Internal 24 Volt 6.5 Amp. Power supply, 150 Watt 120/240 switchable. Parallel Port step and direction Interface, compatible with Mach3. In metal utility box 10 x 10 x 4 inches.   Weight: 12 lbs........$995.00
CNC Four Axis Micro Stepping Motor Controller, Parallel Port Interface Part# EMC-XYAZ-MUBX-K4 XYAZ, Unipolar, 1600 Step/Rev, 3 Amp., Four(4) Motor, Four(4) Axis, Step Motor Controller. Internal 24 Volt 6.5 Amp. Power supply, 150 Watt 120/240 switchable. Parallel Port step and direction Interface, compatible with Mach3. In metal utility box 10 x 10 x 4 inches.   Weight: 28 lbs........$1,495.00
Detail Information Part# EMC-XY-GBX-K2B XY, Bipolar, 2000 Step/Rev, 5 Amp Max., Two(2) Motor, Two(2) Axis, Step Motor Controller. Internal 40 Volt, 16.6 Amp Power Supply, input voltage is 120/240 VAC. Includes: Two(2) NEMA 34 Stepper Motors 1290 oz/in; Two(2) custom made Motor cables, made to required length. One(1) 10 ft. Male to Male Parallel Printer Port Cable. In metal box 12 x 12 x 6 inches.   Weight: 50 lbs........$2,195.00
PN#EMC-XY-GBX-K2M, Two Motor Kit, 740 oz/in, Gecko Drives Part# EMC-XY-GBX-K2M XY, Bipolar, 2000 Step/Rev, 5 Amp Max., Two(2) Motor, Two(2) Axis, Step Motor Controller. Internal 40 Volt, 16.6 Amp Power Supply, input voltage is 120/240 VAC. Includes: Two(2) NEMA 34 Stepper Motors 740 oz/in; Two(2) custom made Motor cables, made to required length. One(1) 10 ft. Male to Male Parallel Printer Port Cable. In metal box 12 x 12 x 6 inches.   Weight: 43 lbs........$1,795.00
Part# EMC-XY-GBX-T XY, Bipolar, 2000 Step/Rev, 5 Amp Max., Two(2) Motor, Two(2) Axis, Step Motor Controller. Internal 40 Volt, 16.6 Amp Power Supply, input voltage is 120/240 VAC. Two(2) custom made Motor cables, made to required length. One(1) 10 ft. Male to Male Parallel Printer Port Cable. In metal box 12 x 12 x 6 inches.   Weight: 34 lbs........$1,295.00
Part# EMC-XYY-GBX XYY, Bipolar, 2000 Step/Rev, 7 Amp Max., Three(3) Motor, Two(2) Axis, Step Motor Controller. The two Y motors are synchronized for driving a gantry at both ends. Connection panel w/On/Off switch, Two Main Power recepticals, Pwr A and B which are relay controlled. Internal 40 Volt, 16.6 Amp., Power Supply 120/240 input. Includes: SuperCam CNC Machine Tool Control Graphics Operating System with manual; 10 foot Male to Male Parallel Printer Port Cable, cables. In metal box 12 x 12 x 6 inches.   Weight: 24 lbs........$1,595.00
More Information Part# EMC-XYY-GBX-K3B XYY, Bipolar, 2000 Step/Rev, 7 Amp Max., Three(3) Motor, Two(2) Axis, Step Motor Controller. The two Y motors are synchronized for driving a machine gantry at both ends. Internal 40 Volt, 16.6 Amp Power Supply, input voltage is 120/240 VAC. Includes: SuperCam for DOS ; Three(3) MTR-342D NEMA 34 Stepper Motors 1245 oz/in; Three(3) custom made Motor cables, made to required length. One(1) 10 foot Male to Male Parallel Printer Port Cable. In metal box 12 x 12 x 6 inches.   Weight: 62 lbs........$2,495.00
Desktop CNC Machine Tool Controllers for Servo and Stepper Motors Part# EMC-XYY-GBX-K3M XYY, Bipolar, 2000 Step/Rev, 7 Amp Max., Three(3) Motor, Two(2) Axis, Step Motor Controller. The two Y motors are synchronized for driving a machine gantry at both ends. With internal 60 Volt Power Supply, Terminal Block on panel for Relay A and B switched circuits. Includes: SuperCam CNC Machine Tool Control Graphics Operating System with manual; Three(3) NEMA 34 Stepper Motors 740 oz/in; Three(3) custom made Motor cables, made to required length. One(1) 10 ft. Male to Male Parallel Printer Port Cable. In metal box 12 x 12 x 6 inches.   Weight: 52 lbs........$1,995.00
Desktop CNC Machine Tool Controllers for Servo and Stepper Motors Part# EMC-XYY-GSBX XYY Servo Motor Controller, two Y's synchronized, with internal 40 Volt Power Supply. One (1) 10 ft. Male to Male Parallel Printer Port Cable. In Metal Box, Input voltage required is 120 or 240 VAC.   Weight: 35 lbs........$1,695.00
Desktop CNC Machine Tool Controllers for Servo and Stepper Motors Part# EMC-XYYGS-BX-K3 XYY Servo Motor Controller, two y's synchronized, with internal 60 Volt Power Supply. Includes: SuperCam CNC Machine Tool Control Graphics Operating System with manual; three (3) MS2330 Servo motors, the two Y motors are synchronized with three (3) NEMA 23 adapter plates; three (3) six foot motor cables; One (1) 10 ft. Male to Male Parallel Printer Port Cable. In Metal Box, Input voltage required is 120 or 240 VAC.   Weight: 43 lbs........$2,995.00
Desktop CNC Machine Tool Controllers for Servo and Stepper Motors Part# EMC-XYYGS-BX-K3B XYY Servo Motor Controller, two y's synchronized, with internal 60 Volt Power Supply. Includes: SuperCam CNC Machine Tool Control Graphics Operating System with manual; One (1) 10 ft. Male to Male Parallel Printer Port Cable. In Metal Box, Input voltage required is 120 or 240 VAC.   Weight: 55 lbs........$3,695.00
Part# EMC-XYY-GSDX XYY, Three(3) Motor, Two(2) Axis, Differential Encoder input, Brushed Servo Motor Controller. The two Y motors are synchronized for driving a gantry machine at both ends. Internal 40 Volt, 16.6 Amp Power Supply, input voltage is 120/240 VAC. Includes: (1) 10 ft. Male to Male Parallel Printer Port Cable. In metal box 12 x 12 x 6 inches.   Weight: 24 lbs........$1,995.00
Detailed Information Part# EMC-XYY-MUBT XYY, Unipolar, 1600 Step/Rev, 3 Amp., Three(3) Motor, Two(2) Axis. Step Motor Controller. The two Y motors are synchronized. Two(2) Controlled Relays with Contacts presented on Terminal Block on Connector Panel. Internal 24 Volt 6.5 Amp. power supply, 150 Watt 120/240 switchable. Parallel Port step and direction Interface. In metal utility box 10 x 10 x 4 inches.   Weight: 12 lbs........$895.00
Detailed Information Part# EMC-XYY-MUBT-K3 XYY, Unipolar, 1600 Step/Rev, 3 Amp., Three(3) Motor, Two(2) Axis. Step Motor Controller. The two Y motors are synchronized. 1600 steps per revolution. Two(2) Controlled Relays with Contacts presented on Terminal Block on Connector Panel. With internal 24 Volt 6.5 Amp. power supply, 150 Watt 120/240 switchable. Parallel Port step and direction Interface. In metal utility box 10 x 10 x 4 inches. Three(3) motors and the cables included.   Weight: 25 lbs........$1,395.00
Detailed Information Part# EMC-XYY-MUBX XYY, Unipolar, 1600 Step/Rev, 3 Amp., Three(3) Motor, Two(2) Axis. Step Motor Controller. The two Y motors are synchronized. Two(2) Control the Power to Two Main Power Recepticals on Connector Panel. Internal 24 Volt 6.5 Amp. power supply, 150 Watt 120/240 switchable. Parallel Port step and direction Interface. In metal utility box 10 x 10 x 4 inches.   Weight: 12 lbs........$895.00
Detailed Information Part# EMC-XYY-MUBX-K3 XYY, Unipolar, 1600 Step/Rev, 3 Amp., Three(3) Motor, Two(2) Axis. Step Motor Controller. The two Y motors are synchronized. 1600 steps per revolution. Two(2) Control the Power to Two Main Power Recepticals on Connector Panel. With internal 24 Volt 6.5 Amp. power supply, 150 Watt 120/240 switchable. Parallel Port step and direction Interface. In metal utility box 10 x 10 x 4 inches. Three(3) motors and the cables included.   Weight: 25 lbs........$1,395.00
EMC-XYYZB-BX 2 amp/phase Computer Controlled Machine Tool Controller Part# EMC-XYYZB-BX XYYZ, Bipolar, 400 Step/Rev, 2.5 Amp. Max, Four(4) Motor, Three(3) Axis, Step Motor Controller. Internal 24 Volt, 6.5 Amp. Power Supply, 150 Watt 120/240 switchable. Two(2) 12 Volt DC fans for forced air cooling. One(1) Male to Male Parallel Printer Port Cable. In metal utility box 10 x 10 x 4 inches. Designed to control Gantry styled tables.   Weight: 12 lbs........$895.00
EMC-XYYZB-BX Four(4) Motor kit for lite duty mechanisms. Part# EMC-XYYZB-BX-K4 XYYZ, Bipolar, 400 Step/Rev, 2.5 Amp., Four(4) Motor, Three(3) Axis, Step Motor Controller. Internal 24 Volt Power Supply, 150 Watt 120/240 switchable. Two(2) fans with filters for cooling. Includes: four(4) NEMA 23 Stepper Motors 214 oz/in torque; four(4) motor cables; One(1) Male to Male Parallel Printer Port Cable. In metal utility box 10 x 10 x 4 inches.   Weight: 28 lbs........$1,495.00
GeckoPwr IV Micro Stepping controller in a box. Part# EMC-XYYZ-GBX XYYZ, Bipolar, 2000 Step/Rev, 5 Amp Max., Four(4) Motor, Three(3) Axis, Step Motor Controller. The two Y motors are synchronized for driving a gantry at both ends. Two computer controlled relays for automatic spindle or torch on/off control. Connection panel w/On/Off switch, 120/240 VAC Input, Internal 40 Volt @ 16.6 Ampere Power Supply; Includes: 10 foot Male to Male Parallel Printer Port Cable. In metal box 12 x 12 x 6 inches.   Weight: 26 lbs........$1,995.00
PN#EMC-XYYZ-GBX-K4B, Gecko Powered with Four(4) 1200 oz/in Nema 34 stepper motors and cables Part# EMC-XYYZ-GBX-K4B XYYZ, Bipolar, 2000 Step/Rev, 5 Amp Max., Four(4) Motor, Three(3) Axis, Step Motor Controller. The two Y motors are synchronized for driving a machine gantry at both ends. Connection panel with On/Off Switch, DB9 Female Motor Connectors and Terminal Block for the Two Internal Relays, Internal 40 Volt, 16.6 Amp Power Supply, input voltage is 120/240 VAC. Includes Four(4) NEMA 34 Stepper Motors 1290 oz/in, 1/2 inch Double Shafts with Home Limit Switches; Includes: Ten(10) foot Male to Male Parallel Printer Port Cable, Four(4) Motor cables, One Ten(10) foot long, Two Twenty(20) foot long and One Thirty(30) foot long. Controller Housed in Metal Utility Box 12 x 12 x 6 inches.   Weight: 82 lbs........$2,695.00
PN#EMC-XYYZ-GBX-K4M, Gecko Powered Four(4) NEMA34 Single Stack Motors and Controller Kit Part# EMC-XYYZ-GBX-K4M XYYZ, Bipolar, 2000 Step/Rev, 5 Amp Max., Four(4) Motor, Three(3) Axis, Step Motor Controller. The two Y motors are synchronized for driving a machine gantry at both ends. Connection panel w/On/Off switch, 120 or 240 VAC, Internal 40 Volt @ 16.6 Ampere Power Supply, includes (4) MTR-341S NEMA 34 Stepper Motors 640 oz/in, with Limit Switches; Includes: 10 foot Male to Male Parallel Printer Port Cable, (4) 10 foot Motor cables. In utility metal box 12 x 12 x 6 inches.   Weight: 75 lbs........$2,495.00
GeckoPwr IV with four 1200 oz/in Nema 34 stepper motors and cables Part# EMC-XYYZ-GBX-K4X XYYZ, Bipolar, 2000 Step/Rev, 5 Amp Max., Four(4) Motor, Three(3) Axis, Step Motor Controller. The two Y motors are synchronized for driving a machine gantry at both ends. Connection panel w/On/Off switch, Internal 40 Volt, 16.6 Amp Power Supply, input voltage is 120/240 VAC. Includes Four(4) NEMA 34 Stepper Motors 1780 oz/in, with Home Limit Switches; Includes: Ten(10) foot Male to Male Parallel Printer Port Cable, Four(4) Motor cables made to user specified lengths. In metal box 12 x 12 x 6 inches.   Weight: 80 lbs........$2,995.00
PN#EMC-XYYZ-GBX-T, Gecko Powered, Four(4) Motor, Three(3) Axis, Two(2) Y motors are synchronized, Micro Stepping Controller Part# EMC-XYYZ-GBX-T XYYZ, Bipolar, 2000 Step/Rev, 5 Amp Max., Four(4) Motor, Three(3) Axis, Step Motor Controller. The two Y motors are synchronized for driving a gantry at both ends. Two computer controlled relays for automatic spindle or torch on/off control. Connection panel w/On/Off switch, 120/240 VAC Input, Internal 40 Volt @ 16.6 Ampere Power Supply; Includes: 10 foot Male to Male Parallel Printer Port Cable. In metal box 12 x 12 x 6 inches.   Weight: 26 lbs........$1,995.00
Four(4) Brushed Servo Motor Controller Part# EMC-XYYZ-GSBX XYYZ, Four(4) Motor, Three(3) Axis, Brushed Servo Motor Controller. The two Y motors are synchronized for driving a machine gantry at both ends. Includes: One (1) 10 ft. Male to Male Parallel Printer Port Cable. In metal box 12 x 12 x 6 inches.   Weight: 36 lbs........$2,195.00
Servo Motor Controller, four(4) Big motors included. Part# EMC-XYYZ-GSBX-K4B XYYZ Servo Motor Controller with four (4) servo motor drives, two are synchronized for driving a gantry machine at both ends. Includes: Four (4) NEMA 34 Servomotors 72 Volt, 8.5 Ampere, 850 oz/in; 60 Volt, 10 Amp Internal Power Supply; One Male to Male Parallel Printer Port Cable; Four (4) 10 ft. servo motor cables. In metal box 12 x 12 x 6 inches.   Weight: 87 lbs........$3,995.00
CNC Brushed Servomotor Controller, Differential Encoder Signals Part# EMC-XYYZ-GSDX XYYZ, Four(4) Motor, Three(3) Axis, Differential Encoder input, Brushed Servo Motor Controller. The two Y motors are synchronized for driving a machine gantry at both ends. Internal 60 Volt, 10.4 Amp Power Supply, input voltage is 120/240 VAC. Includes: One (1) 10 ft. Male to Male Parallel Printer Port Cable. In metal box 12 x 12 x 6 inches.   Weight: 38 lbs........$2,695.00
Brushed Servomotors, Controller, Cables Bundle Part# EMC-XYYZ-GSDX-K4B XYYZ, Four (4) Motor, Three(3) Axis, Differential Encoder input, Brushed Servo Motor Controller. The two Y motors are synchronized for driving a machine gantry at both ends. Internal 60 Volt, 10.4 Amp Power Supply, input voltage is 120/240 VAC. Includes: Four (4) NEMA 34 Servomotors Torque 850 oz/in; One Male to Male Parallel Printer Port Cable; Four (4) 10 ft. motor cables. In metal box 12 x 12 x 6 inches.   Weight: 87 lbs........$4,495.00
MightyBx Driver Controller Part# EMC-XYYZ-MUBX XYYZ, Unipolar, 1600 Step/Rev, 3 Amp., Four(4) Motor, Three(3) Axis, Step Motor Controller. The two Y motors are synchronized for driving a gantry at both ends. Internal 24 Volt 6.5 Amp. power supply, 150 Watt 120/240 switchable. Parallel Port step and direction Interface. In metal utility box 10 x 10 x 4 inches.   Weight: 12 lbs........$995.00
Detailed Information Part# EMC-XYYZ-MUBX-K4 XYYZ, Unipolar, 1600 Step/Rev, 3 Amp., Four(4) Motor, Three(3) Axis, Step Motor Controller. The two Y motors are synchronized for driving a gantry at both ends. Internal 24 Volt 6.5 Amp. power supply, 150 Watt 120/240 switchable. Parallel Port step and direction Interface. In metal utility box 10 x 10 x 4 inches. Four(4) NEMA23, 300 oz/in, 0.25" Diameter Double Shafts, Double Stacked Motors with Home Limit Switches and the Cables included.   Weight: 28 lbs........$1,495.00
P#EMC-XYYZ-MUBX-K4B Controller, Motors and Cables, Parallel Port Interface Part# EMC-XYYZ-MUBX-K4B XYYZ, Unipolar, 1600 Step/Rev, 3 Amp., Four(4) Motor, Three(3) Axis, Step Motor Controller. The two Y motors are synchronized for driving a gantry at both ends. Internal 24 Volt 6.5 Amp. Power supply, 150 Watt 120/240 switchable. Parallel Port step and direction Interface. In metal utility box 10 x 10 x 4 inches. Four(4) NEMA23, 420 oz/in, 3/8" Double Shafts, Double Stacked Motors and the Cables included.   Weight: 28 lbs........$1,495.00
CNC XYZA Brushed Servomotor Controller with Differential Encoder Signals Part# EMC-XYZA-GSDX XYZA, Four(4) Axis, Differential Encoder input, Brushed Servo Motor Controller. Internal 60 Volt, 10.4 Amp Power Supply, input voltage is 120/240 VAC. Includes: One (1) 10 ft. Male to Male Parallel Printer Port Cable. In metal box 12 x 12 x 6 inches.   Weight: 38 lbs........$2,695.00
CNC Stepper Motor Controller, Drives 3 Motors Part# EMC-XYZB-BX XYZ, Bipolar, 400 Step/Rev, 2.5 Amp. Maximum, Three(3) Motor, Three(3) Axis, Step Motor Controller. Internal 24 Volt 6.5 Amp. Power Supply, 150 Watt 120/240 switchable. Two DC fans for forced air cooling. Parallel Port Step and Direction interface, Male to Male Parallel Printer Port Cable included. In metal utility box 10 x 10 x 4 inches. For a three(3) motor application.   Weight: 12 lbs........$795.00
Gecko Powered Three Axis Micro Stepping CNC Controller Box Part# EMC-XYZ-GBX XYZ, Bipolar, 2000 Step/Rev, 5 Amp Max., Three(3) Motor, Three(3) Axis, Step Motor Controller. Connection panel w/On/Off switch, Two Power Circuits A and B, Internal 40 Volt, 16.6 Amp., Power Supply 120/240 input. Includes: 10 foot Male to Male Parallel Printer Port Cable, cables. In metal box 12 x 12 x 6 inches.   Weight: 24 lbs........$1,595.00
PN#EMC-XYZ-GBX-K3B, Gecko Powered CNC Controller With three 1200 oz/in Stepper Motors and Cables Part# EMC-XYZ-GBX-K3B XYZ, Bipolar, 2000 Step/Rev, 5 Amp Max., Three(3) 1200 oz/in, double shafted, NEMA 34 Stepper Motors, Three(3) Axis, Step Motor Controller. Internal 40 Volt, 16.6 Amp Power Supply, input voltage is 120/240 VAC. Includes: Mach3 Demo Version, Three(3) 10 foot Motor cables, made to required length. One(1) 10 foot Male to Male Parallel Printer Port Cable, In metal utility box 12 x 12 x 6 inches.   Weight: 62 lbs........$2,495.00
PN#EMC-XYZ-GBX-K3M, Gecko Powered, Three(3) Axis, Three(3) Motor Controller Kit with Cables Part# EMC-XYZ-GBX-K3M XYZ, Bipolar, 2000 Step/Rev, 5 Amp Max., Three(3) Motor, Three(3) Axis, Step Motor Controller. Internal 40 Volt, 16.6 Amp Power Supply, input voltage is 120/240 VAC. Includes: Three(3) NEMA 34 Stepper Motors 740 oz/in; Three(3) custom made Motor cables, made to required length. One(1) 10 ft. Male to Male Parallel Printer Port Cable. In metal box 12 x 12 x 6 inches.   Weight: 52 lbs........$1,995.00
Part# EMC-XYZ-GBX-K3X XYZ, Bipolar, 2000 Step/Rev, 5 Amp Max., Three(3) Motor, Three(3) Axis, Step Motor Controller. Internal 40 Volt, 16.6 Amp Power Supply, input voltage is 120/240 VAC. Includes: Three(3) NEMA 34 Stepper Motors 400 oz/in; Three(3) custom made Motor cables, made to required length. One(1) 10 ft. Male to Male Parallel Printer Port Cable. In metal box 12 x 12 x 6 inches.   Weight: 52 lbs........$2,495.00
PN#EMC-XYZ-GBX-P, Gecko Powered XYZ Three Axis Micro Stepping CNC Controller Box Part# EMC-XYZ-GBX-P XYZ, Bipolar, 2000 Step/Rev, 5 Amp Max., Three(3) Motor, Three(3) Axis, Step Motor Controller. Connection panel w/On/Off switch, Two Power Circuits A and B, Internal 40 Volt, 16.6 Amp., Power Supply 120/240 input. Includes: 10 foot Male to Male Parallel Printer Port Cable, cables. In metal box 12 x 12 x 6 inches.   Weight: 24 lbs........$1,595.00
PN#EMC-XYZ-GBX-T, Gecko Powered XYZ Three Axis Micro Stepping CNC Controller Box, Terminal Block for Relay Contacts Part# EMC-XYZ-GBXT XYZ, Bipolar, 2000 Step/Rev, 5 Amp Max., Three(3) Motor, Three(3) Axis, Step Motor Controller. Connection panel w/On/Off switch, Terminal Block for Relay A and B on connector panel, DB9 Female connector for each motor. Internal 40 Volt, 16.6 Amp., Power Supply 120/240 input. Includes: 10 foot Male to Male Parallel Printer Port Cable, cables. In metal box 12 x 12 x 6 inches.   Weight: 24 lbs........$1,595.00
PN#EMC-XYZ-GSBX, Gecko Powered Three(3) Brushed Servo Motor Controller Part# EMC-XYZ-GSBX XYZ, Three(3) Motor, Three(3) Axis, Brushed Servo Motor Controller. Internal 40 Volt, 16.6 Amp Power Supply, input voltage is 120/240 VAC. Includes: One(1) 10 ft. Male to Male Parallel Printer Port Cable. In metal box 12 x 12 x 6 inches.   Weight: 26 lbs........$1,695.00
PN#EMC-XYZ-GSBX-K3C, Three(3) NEMA23 Brushed Servo Motors, Cables and Gecko Powered Controller Kit Part# EMC-XYZ-GSBX-K3C XYZ, Three(3) Motor, Three(3) Axis, Brushed Servo Motor Controller. Internal 40 Volt, 16.6 Ampere Power Supply, Input Voltage is 120/240 VAC. Includes: Three (3) DC Brushed Servo Motors, Three(3) Servo Motor cables each 6 foot long, One (1) 10 ft. Male to Male Parallel Printer Port Cable. In metal box 12 x 12 x 6 inches.   Weight: 48 lbs........$1,695.00
XYZ Servo Motor Controller with internal 60 Volt Power Supply.  Includes: SuperCam CNC Machine Tool Control Graphics Operating System with manual; (1) 10 ft. Male to Male Parallel Printer Port Cable. In Metal Box,  Input voltage required is 117/230 VAC. Part# EMC-XYZ-GSDX XYZ, Three(3) Motor, Three(3) Axis, Differential Encoder input, Brushed Servo Motor Controller. Internal 40 Volt, 16.6 Amp Power Supply, input voltage is 120/240 VAC. Includes: One(1) 10 ft. Male to Male Parallel Printer Port Cable. In metal box 12 x 12 x 6 inches.   Weight: 24 lbs........$1,995.00
Details Three(3) Big Brushed Servo Motor Controller Kit, Differential Encoder Signals Part# EMC-XYZ-GSDX-K3B XYZ, Three(3) Motor, Three(3) Axis, Differential Encoder input, Brushed Servo Motor Controller. Internal 40 Volt, 16.6 Amp Power Supply, input voltage is 120/240 VAC. Includes: Three (3)NEMA 34 Size Servo motors, Torque 850 oz/in; three (3) six foot motor cables; One (1) 10 ft. Male to Male Parallel Printer Port Cable. In metal box 12 x 12 x 6 inches.   Weight: 60 lbs........$3,995.00
MightyBx III Unipolar Micro Stepping Part# EMC-XYZ-MUBX XYZ, Unipolar, 1600 Step/Rev, 3 Amp., Three(3) Motor, Three(3) Axis, Step Motor Controller. Two(2) Control the Power to Two Main Power Recepticals on Connector Panel. Internal 24 Volt 6.5 Amp. power supply, 150 Watt 120/240 VAC switchable. Parallel Port step and direction Interface. In metal utility box 10 x 10 x 4 inches.   Weight: 12 lbs........$895.00
Detailed Information Part# EMC-XYZ-MUBX-K3 XYZ, Unipolar, 1600 Step/Rev, 3 Amp., Three(3) Motor, Three(3) Axis, Step Motor Controller. Two(2) Control the Power to Two Main Power Recepticals on Connector Panel. Internal 24 Volt 6.5 Amp. Power supply, 150 Watt 120/240 switchable. Parallel Port step and direction Interface. In metal utility box 10 x 10 x 4 inches. Three(3) NEMA23, 300 oz/in, 0.25" Diameter Double Shafts, Double Stacked Motors with Home Limit Switches and the Cables included.   Weight: 25 lbs........$1,295.00
Part# EMC-YXX-MUBX YXX, Unipolar, 1600 Step/Rev, 3 Amp., Three(3) Motor, Two(2) Axis. Step Motor Controller. The two X motors are synchronized. 1600 steps per revolution. With internal 24 Volt 6.5 Amp. power supply, 150 Watt 120/240 switchable. Parallel Port step and direction Interface. In metal utility box 10 x 10 x 4 inches.   Weight: 12 lbs........$895.00
Part# EMC-YXX-MUBX-K3 YXX, Unipolar, 1600 Step/Rev, 3 Amp., Three(3) Motor, Two(2) Axis. Step Motor Controller. The two X motors are synchronized. Internal 24 Volt 6.5 Amp. Power supply, 150 Watt 120/240 switchable. Parallel Port step and direction Interface. In metal utility box 10 x 10 x 4 inches. Three(3) NEMA23, 300 oz/in, 0.25" Diameter Double Shafts, Double Stacked Motors with Home Limit Switches and the Cables included.   Weight: 25 lbs........$1,395.00
Part# EML-1/8-031-4 End Mill, 1/32", 4 Flute, 1/8" Shank, 5/64 Flute Length, 1 " OAL, Single End, CNC Ground 10% Micrograin, Single End, Right Hand Spiral, Regular Length, Square End........$5.31
Part# EML-1/8-031-4B Ball End Mill, 1/32", 4 Flute, 1/8" Shank, 5/64 Flute Length, 1 " OAL, Single End, All Micrograin Solid Carbide, Right Hand Spiral, Regular Length........$12.33
Part# EML-1/8-062-2 End Mill, 1/16", 2 Flute, 1/8" Shank, 3/16 Flute Length, 1 " OAL, Single End, CNC Ground 10% Micrograin, Single End, Right Hand Spiral, Regular Length, Square End........$6.75
Part# EML-1/8-062-4 End Mill, 1/16", 4 Flute, 1/8" Shank, 3/16 Flute Length, 1 " OAL, Single End, CNC Ground 10% Micrograin, Single End, Right Hand Spiral, Regular Length, Square End........$6.75
Part# EML-1/8-062-4B Ball End Mill, 1/16", 4 Flute, 1/8" Shank, 3/16 Flute Length, 1 " OAL, Single End, All Micrograin Solid Carbide, Right Hand Spiral, Regular Length........$9.63
Part# EML-1/8-125-2 End Mill, 1/8", 2 Flute, 1/8" Shank, " Flute Length, 1 " OAL, Single End, CNC Ground 10% Micrograin, Right Hand Spiral, Regular Length, Square End........$6.57
Part# EML-1/8-125-4 End Mill, 1/8", 4 Flute, 1/8" Shank, " Flute Length, 1 " OAL, Single End, CNC Ground 10% Micrograin, Right Hand Spiral, Regular Length, Square End........$6.57
Part# EML-1/8-125-4B Ball End Mill, 1/8", 4 Flute, 1/8" Shank, " Flute Length, 1 " OAL, Single End, All Micrograin Solid Carbide, Single End, Right Hand Spiral, Regular Length........$8.09
Part# GR-RACK-16-48 Gear Rack, 1/2" X 1/2", 16 Pitch, 4 feet long   Weight: 12 lbs........$57.47
Part# GR-RACK-16-72 Gear Rack, 1/2" X 1/2", 16 Pitch, 6 feet long   Weight: 16 lbs........$87.78
Part# GR-RACK-24-48 Gear Rack, 1/4" X 1/4", 24 Pitch, 4 feet long........$51.57
Part# GR-RACK-24-72 Gear Rack, 1/4" X 1/4", 24 Pitch, 6 feet long   Weight: 12 lbs........$72.63
Part# GR-SPUR-25-625 Gear, Spur, 24 Pitch, 15 Teeth, 1/4" bore, Pitch Dia 0.625", Face Width 1/4", Hub Dia 1/2", with set screw........$34.76
Part# GR-SPUR-5-1 Gear, Spur, 16 Pitch, 16 Teeth, 1/2" bore, Pitch Dia 1", Face Width 1/2", Hub Dia 13/16", with set screw   Weight: 1 lbs........$37.05
Part# JC-1215 CNC Router Table, X Y Work Area 4 x 4 foot,, Z Work Area 6 inch, Ball screws and nuts on X and Y axis, Single Ball Screw on Z axis, Spindle 240 VAC, 2.2Kw, 24000 rpm, Water Cooled, T Sot Table, Stepper Motors, Micro Stepping Drives up to 1/256 Micro Step, Parallel Port Step and Direction Control, Mach3 Compatible. FOB Los Angles Harbor   Weight: 1200 lbs........$7,950.00
Part# JC-1225 CNC Router Table, X Y Work Area 4 x 8 foot,, Z Work Area 6 inch, Ball screws and nuts on X and Y axis, Single Ball Screw on Z axis, Spindle 240 VAC, 2.2Kw, 24000 rpm, Water Cooled, T Sot Table, Stepper Motors, Micro Stepping Drives up to 1/256 Micro Step, Parallel Port Step and Direction Control, Mach3 Compatible. FOB Los Angles Harbor   Weight: 1500 lbs........$8,950.00
Part# JC-1326 CNC Router Table, X Y Work Area 51 x 102 inch, Z Work Area 11.8 inch, Rack and Pinion Drive on X and Y axis, Single Ball Screw on Z axis, Spindle 240 VAC, 4.5Kw, 24000 rpm, T Sot Table, Stepper Motors, Micro Stepping Drives up to 1/256 Micro Step, Parallel Port Step and Direction Control, Mach3 Compatible. FOB Los Angles Harbor   Weight: 1800 lbs........$14,750.00
Part# JC-6090 CNC Router Table, X Y Work Area 24 x 36 inch,, Z Work Area 3.1 inch, Ball screws and nuts on X and Y axis, Single Ball Screw on Z axis, Spindle 240 VAC, 2.2Kw, 24000 rpm, Water Cooled, T Sot Table, Stepper Motors, Micro Stepping Drives up to 1/256 Micro Step, Parallel Port Step and Direction Control, Mach3 Compatible. FOB Los Angles Harbor   Weight: 900 lbs........$5,295.00
MiniRobo, 12(x), 8.5(y), 3.75(z) inch axis motion chassis.  CNC ready XYZ table.  4:1 Lead Screws, SuperNuts and Anti-Backlash Couplers.  Does Not Include: Dremel Drill and Mount, Stepper Motors. Part# MNR-1285-CHS MiniRobo Chassis, XYZ table CNC ready., Working area of 12"(x), 8.5"(y), 3.75"(z); 4:1 Lead Screws, SuperNuts and Anti-Backlash Couplers. Does Not Include: Dremel Drill and Mount, Stepper Motors.   Weight: 48 lbs........$2,495.00
Part# MNR-1285-MUX MiniRobo, 12"(x), 8.5"(y), 3.75"(z) axis motion, Micro Step, 0.00015625 step sizes, Includes: Plug and Play; 3 NEMA 23 Stepper Motors cabled to USB-XYZ-MUBX Microstepping Controller with internal 24 Volt Power Supply and USB Cable; SuperCamXp Machine Control Graphics Operating System. Plug and Play with Windows XP computers.   Weight: 96 lbs........$3,295.00
Part# MNR-1285-UX MiniRobo, 12"(x), 8.5"(y), 3.75"(z) axis motion, 0.000625 step size. Includes: Three(3) NEMA 23 Stepper Motors 214 oz/in torque; USB-XYZB-BX, 3 axis controller with internal 24VDC Power supply 120/240VAC switchable, with USB Cable; SuperCamXp Machine Control Graphics Operating System. Plug and Play compatible with Windows Xp computers.   Weight: 58 lbs........$3,195.00
CNC Single Stack, Double Shafted, Stepper Motor NEMA 23 Plasma, Mill, Laser, Engraver Part# MTR-232BD Stepper Motor, NEMA 23, Double Stack Rotor, Double Shafted, 195 oz/in Bi-polar & 135 oz/in Unipolar Torque, 1.64 Amp/Phase, 2.7 Ohm Phase Resistance   Weight: 4 lbs........$135.00
CNC Single Stack, Single Shafted, Stepper Motor NEMA 34 Plasma, Mill, Laser, Engraver Part# MTR-341S Stepper Motor, NEMA 34, Single Stack Rotor, Single Shaft, 665 oz/in Bi-polar & 470 oz/in Unipolar Torque, 35V, 4.7 Amp/Phase, 0.58 Ohm Phase Resistance, 6 Wire Leads,0.500 Diameter Shaft with .125 Straight Key.   Weight: 7 lbs........$269.00
CNC Double Stack, Double Shafted, Stepper Motor NEMA 34 Plasma, Mill, Laser, Engraver Part# MTR-342D Stepper Motor, NEMA 34, Standard Double Stack Rotor, Double Shaft, 1245 oz/in Bi-polar & 885 oz/in Unipolar Torque, 65V, 4.3 Amp/Unipolar Phase, 0.9 Ohm Phase Resistance, 6 Wire Leads, 0.500 Diameter Shaft with .125 Straight Key.   Weight: 8 lbs........$367.00
Heavy Duty CNC Stepper Motor Cable Part# MTR-CBL-10 Motor Cable, Heavy Duty 20 Gage Shielded, 10ft., DB9 M/F, $2.00 for each additional foot, lengths can be made up to 30 feet.   Weight: 1 lbs........$50.00
Part# PCR-7539 Porter Cable Model 7539 Router, can be ordered with 220 VAC 50 hz input power.........$530.00
Part# saferaz-100 One-Hundred Dollar Contribution to Safer Arizona Political Action Committee ID Number 201400153 Sponsoring Petition Number C-04-2014 Ballot Initiative Campaign Fund........$100.00
Part# saferaz-20 Twenty Dollar Contribution to Safer Arizona Political Action Committee ID Number 201400153 Sponsoring Petition Number C-04-2014 Ballot Initiative Campaign Fund........$20.00
Part# saferaz-50 Fifty Dollar Contribution to Safer Arizona Political Action Committee ID Number 201400153 Sponsoring Petition Number C-04-2014 Ballot Initiative Campaign Fund........$50.00
Part# saferaz-500 Five-Hundred Dollar Contribution to Safer Arizona Political Action Committee ID Number 201400153 Sponsoring Petition Number C-04-2014 Ballot Initiative Campaign Fund........$500.00
Part# saferaz-Petition-A Six(6) Petitions for Collecting Signatures Including Priority Mail and Handling........$10.00
Part# saferaz-Petition-B Twenty(20) Petitions for Collecting Signatures Including Priority Mail and Handling........$20.00
Safer Arizona Campaign to Legalize Marijuana Part# saferaz-Tshirt-Green Green Tee Shirt Message Marijuana is Safer than Alcohol and a Petition Number C-04-2014 for gathering signatures. Includes Priority Mail and Handling.........$20.00
Part# saferaz-Tshirt-Green-L Green Tee Shirt Message Marijuana is Safer than Alcohol and a Petition Number C-04-2014 for gathering signatures. Includes Priority Mail and Handling. Size LARGE........$20.00
Part# saferaz-Tshirt-Green-M Green Tee Shirt Message Marijuana is Safer than Alcohol and a Petition Number C-04-2014 for gathering signatures. Includes Priority Mail and Handling. Size MEDIUM........$20.00
Safer Arizona Campaign to Legalize Marijuana Part# saferaz-Tshirt-Green-S Green Tee Shirt Message Marijuana is Safer than Alcohol and a Petition Number C-04-2014 for gathering signatures. Includes Priority Mail and Handling. Size SMALL........$20.00
Part# saferaz-Tshirt-Green-XL Green Tee Shirt Message Marijuana is Safer than Alcohol and a Petition Number C-04-2014 for gathering signatures. Includes Priority Mail and Handling. Size EXTRA LARGE........$20.00
Safer Arizona Red Tee Shirt Part# saferaz-Tshirt-Red Red Tee Shirt with Message Marijuana is Safer than Alcohol and a Petition Number C-04-2014 for gathering signatures. Includes Priority Mail and Handling.........$20.00
Part# saferaz-Tshirt-Red-L Red Tee Shirt with Message Marijuana is Safer than Alcohol and a Petition Number C-04-2014 for gathering signatures. Includes Priority Mail and Handling. Size LARGE........$20.00
Part# saferaz-Tshirt-Red-M Red Tee Shirt with Message Marijuana is Safer than Alcohol and a Petition Number C-04-2014 for gathering signatures. Includes Priority Mail and Handling. Size MEDIUM........$20.00
Safer Arizona Red Tee Shirt Part# saferaz-Tshirt-Red-S Red Tee Shirt with Message Marijuana is Safer than Alcohol and a Petition Number C-04-2014 for gathering signatures. Includes Priority Mail and Handling. Size SMALL........$20.00
Part# saferaz-Tshirt-Red-XL Red Tee Shirt with Message Marijuana is Safer than Alcohol and a Petition Number C-04-2014 for gathering signatures. Includes Priority Mail and Handling. Size EXTRA LARGE........$20.00
Safer Arizona Campaign to Legalize Marijuana Part# saferaz-Tshirt-White White Tee Shirt with Message For the Cause and a Petition Number C-04-2014 for gathering signatures. Includes Priority Mail and Handling.........$20.00
Safer Arizona Black Tank Top Boys Part# saferaz-Ttop-Black Black Tank Top Boys with Message Marijuana is Safer than Alcohol and a Petition Number C-04-2014 for gathering signatures. Includes Priority Mail and Handling.........$20.00
Safer Arizona Black Tank Top Boys Part# saferaz-Ttop-Black-L Black Tank Top Boys with Message Marijuana is Safer than Alcohol and a Petition Number C-04-2014 for gathering signatures. Includes Priority Mail and Handling. Size LARGE........$20.00
Part# saferaz-Ttop-Black-XL Black Tank Top Boys with Message Marijuana is Safer than Alcohol and a Petition Number C-04-2014 for gathering signatures. Includes Priority Mail and Handling. Size EXTRA LARGE........$20.00
Safer Arizona Pink Girls Tank Top Part# saferaz-Ttop-Pink Pink Tank Top Girls with Message Marijuana is Safer than Alcohol and a Petition Number C-04-2014 for gathering signatures. Includes Priority Mail and Handling.........$20.00
Part# saferaz-Ttop-Pink-M Pink Tank Top Girls with Message Marijuana is Safer than Alcohol and a Petition Number C-04-2014 for gathering signatures. Includes Priority Mail and Handling. Size MEDIUM........$20.00
Safer Arizona Pink Girls Tank Top Part# saferaz-Ttop-Pink-S Pink Tank Top Girls with Message Marijuana is Safer than Alcohol and a Petition Number C-04-2014 for gathering signatures. Includes Priority Mail and Handling. Size SMALL........$20.00
Part# SCXP-CodeGen This is the SuperCamXp program full release for generating 2D and 2.5D Code files, HPGL, DXF and BMP to Gcode files. Edit imported files to optimize machine tool paths. CD with tutorials.........$149.00
Part# SMTR-2230-02 Servo Motor with 200 CPR Encoder, Permanet Magnet, 2.7 amp, 145 Watts, 220 oz/in, Made in USA..   Weight: 4 lbs........$359.00
Part# SMTR-2230-02D Servo Motor with 200 CPR Encoder, Differential Signals, Permanet Magnet, 2.7 amp, 145 Watts, 220 oz/in, DB15 Male Connector, Made in USA..   Weight: 4 lbs........$439.00
NEMA34 Brushed Servo Motor with Differential Encoder Signals, Homing Limit Switch and DB16 Male Connector Part# SMTR-3401D Servo Motor with Covered Encoder 250 line CPR, Differential Encoder Signals, 72 volts, 8.5 Amps, 850 oz/in, DB15 Male Connector.   Weight: 8 lbs........$495.00
Part# SMTR-CBL-SE6 Servomotor Cable, Single End Signals from Encoder, 15 ampere Maximum Armature current, 6 foot long, DB15 male to female connectors.   Weight: 2 lbs........$60.00
Taig Tools Micro Lathe Complete Spindle Part# TAIG-100-00 Complete Headstock for the Taig Lathe. It uses the original Taig Colets. It can also be used as a mill headstock.   Weight: 3.5 lbs........$63.90
Taig Tools Micro Lathe Complete Spindle Part# TAIG-100-00L Complete Headstock for the Taig Lathe.   Weight: 3.5 lbs........$63.90
Part# TAIG-100-01 Headstock Housing........$23.50
Part# TAIG-100-02 Lathe Bed........$62.25
Part# TAIG-100-03 Spindle........$16.45
Part# TAIG-100-03A Complete Spindle Assembly........$36.95
Part# TAIG-100-04 Bearing (2 required)........$6.50
Part# TAIG-100-05 Bearing Spacer........$8.75
Part# TAIG-100-06 Tru Arc Clip........$0.25
Part# TAIG-100-07 Thumb Screw........$0.25
Part# TAIG-100-08 Carriage Stop........$0.50
Part# TAIG-100-09 Rack........$12.00
Part# TAIG-100-10 4-40 Screw........$0.10
Part# TAIG-100-11 Carriage........$29.25
Part# TAIG-100-12 Carriage Gib........$3.75
Part# TAIG-100-13A Pinion Gear........$3.75
Part# TAIG-100-13B Eccentric for Pinion Gear........$1.35
Part# TAIG-100-14 Retainer Clip........$0.20
Part# TAIG-100-15 Hand Wheel........$2.65
Part# TAIG-100-16 Handle........$0.70
Part# TAIG-100-17 Crosslide Screw........$5.25
Part# TAIG-100-18 10-32 Nut (2 required)........$0.10
Part# TAIG-100-19 10-32 Set Screw (2 required)........$0.10
Part# TAIG-100-20 Bearing Block........$2.65
Part# TAIG-100-22 Dial Crosslide........$3.65
Part# TAIG-100-23 6-32 Acorn Nut........$0.70
Part# TAIG-100-24 Handle........$0.70
Part# TAIG-100-25 Crosslide Screw Nut   Weight: 0.625 lbs........$2.65
Part# TAIG-100-26 Crosslide   Weight: 0.375 lbs........$19.35
Part# TAIG-100-27 Crosslide Gib   Weight: 0.625 lbs........$2.95
Part# TAIG-100-29 10-32 X 1 3/4 hex socket & nut........$0.20
Part# TAIG-100-32 10-32 Square Nut........$0.10
Part# TAIG-100-33 10-32 Screw........$0.10
Part# TAIG-100-34 Thumb Screw........$0.20
Part# TAIG-100-40L Left Hand Dial Assembly for the cross slide includes the cross slide lead screw.   Weight: 0.375 lbs........$16.25
Part# TAIG-1016 Power feed retrofit Kit   Weight: 12 lbs........$131.00
Part# TAIG-1020B Add for WW Spindle and drawbar in Lathe - in lieu of standard spindle (use WW Jewelers collets only)........$35.40
Motor for the micro lathe Part# TAIG-1021WIRED Motor, 1/4 HP, 115V 60hz 1750 RPM 1 Phase, 60Hz, 48 Frame, 1.0 SF, 1/2" shaft, prewired with switch and ready to go.   Weight: 8 lbs........$123.10
Motor mount bracket with necessary hardware, fits above motors and NEMA 48 frame motors Part# TAIG-1022 Motor mount bracket with necessary hardware, fits above motors and NEMA 48 frame motors   Weight: 0.5 lbs........$5.95
Part# TAIG-1023 Mounting board 12" X 18" used for No. 1021 motor (motor mount bracket not included)........$8.40
Depth stop for work piece in chuck Part# TAIG-1026 Depth stop for work piece in chuck   Weight: 0.2 lbs........$4.00
Taig Tools Micro Lathe 4 Jaw Chuck Part# TAIG-1030 4 jaw 3 1/4" dia. Lathe Chuck 3/4-16 thread Mount, jaws adjusted independently (reversable heat treated jaws)........$72.30
Part# TAIG-1030ER 4 jaw 3 1/4" dia. Lathe Chuck 3/4-16 thread Mount, jaws adjusted independently (reversable heat treated jaws). To be used with the ER16 spindles.........$72.50
Lathe Dog, holds work piece while turning between centers. Part# TAIG-1034 Lathe Dog, holds work piece while turning between centers.   Weight: 0.1 lbs........$10.15
3 1/4 Part# TAIG-1035 Face plate 3 1/4" 3/4-16 thread mount   Weight: 1.2 lbs........$17.60
Desktop CNC Machine Tool Controllers for Servo and Stepper Motors Part# TAIG-1036 Face plate angle bracket set   Weight: 0.5 lbs........$6.60
2 Part# TAIG-1037 Face plate 2" diameter (wood turners)   Weight: 1.5 lbs........$9.15
2 inch Diameter Face Plate (3 holes) Part# TAIG-1037-3H Face plate 2" diameter (wood turners) with 3-holes drilled   Weight: 1.5 lbs........$12.20
Wood turner tool rest Part# TAIG-1038 4" Swivel Joint, adjustable height Tool Rest (Wood Turners)........$27.90
TaigCollet set, collet closer with sizes (1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16 and one blank) Part# TAIG-1040 Collet set, collet closer with 8 collets sizes 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16 & one blank   Weight: 1 lbs........$36.70
ER16 Collet set, (1/16, 1/8, 3/16, 1/4, 5/16, 3/8) Part# TAIG-1040ER ER16 Collet set, (1/16, 1/8, 3/16, 1/4, 5/16, 3/8)........$62.15
1/8 Collet Part# TAIG-1041A 1/8 collet   Weight: 0.1 lbs........$5.30
5/32 collet Part# TAIG-1041B 5/32 collet   Weight: 0.1 lbs........$5.30
3/16 collet Part# TAIG-1041C 3/16 collet   Weight: 0.1 lbs........$5.30
7/32 collet Part# TAIG-1041D 7/32 collet   Weight: 0.1 lbs........$5.30
1/4 collet Part# TAIG-1041E 1/4 collet   Weight: 0.1 lbs........$5.30
ER16 Collet 1/16 Part# TAIG-1041ER-A ER16 Collet 1/16   Weight: 0.1 lbs........$11.40
ER16 Collet 1/8 Part# TAIG-1041ER-B ER16 Collet 1/8   Weight: 0.1 lbs........$11.40
ER16 Collet 3/16 Part# TAIG-1041ER-C ER16 Collet 3/16........$11.15
ER16 Collet 1/4 Part# TAIG-1041ER-D ER16 Collet 1/4........$11.15
ER16 Collet 5/16 Part# TAIG-1041ER-E ER16 Collet 5/16........$11.15
ER16 Collet 3/8 Part# TAIG-1041ER-F ER16 Collet 3/8   Weight: 0.1 lbs........$11.40
Part# TAIG-1041ER-G ER16 Collet 3/32........$11.15
Part# TAIG-1041ER-H ER16 Collet 5/64........$11.15
Part# TAIG-1041ER-I ER16 Collet 5/32........$11.15
Part# TAIG-1041ER-J ER16 Collet 1/32........$11.15
9/32 collet Part# TAIG-1041F 9/32 collet   Weight: 0.1 lbs........$5.30
5/16 collet Part# TAIG-1041G 5/16 collet   Weight: 0.1 lbs........$5.30
Collet Closer Part# TAIG-1042 Collet Closer   Weight: 0.2 lbs........$7.60
ER Collet Closer for ER 16 spindle only Part# TAIG-1042ER ER Collet Closer for ER 16 spindle only........$12.90
Part# TAIG-1043 4 Blank collets furnished unslotted for making special arbors (may be bored & slotted)   Weight: 0.2 lbs........$3.45
Adapter that screws on to the 3/4-16 spindle and has an ER16 taper on the other end. This allows the orginal spindles with 3/4-16 threads to be used with ER16 collets. Part# TAIG-1045ER Adapter that screws on to the 3/4-16 spindle and has an ER16 taper on the other end. This allows the orginal spindles with 3/4-16 threads to be used with ER16 collets.   Weight: 0.2 lbs........$29.30
Taig Tools Micro Lathe 3 Jaw Chuck Part# TAIG-1050 3 Jaw 3 1/4" diameter, self-centering scroll chuck (steel body) with reversable aluminum soft jaws 3/4-16 thread   Weight: 4 lbs........$70.40
Part# TAIG-1050ER 3 Jaw 3 1/4" dia. self centering scroll chuck (steel body) with reversable aluminum soft jaws for an ER16 spindle (22mm x 1.5mm thread).........$72.00
Desktop CNC Machine Tool Controllers for Servo and Stepper Motors Part# TAIG-1051 Additional blank soft jaw set   Weight: 0.3 lbs........$11.40
Part# TAIG-1052 Full circle soft jaw for 3 jaw chuck   Weight: 0.5 lbs........$10.90
Part# TAIG-1060 4-Jaw Chuck, 3 1/4" diameter, 3/4-16 thread, self-centering scroll (steel body) with reversible aluminum soft jaws   Weight: 4 lbs........$78.10
Part# TAIG-1061 Soft Jaw Set 6-32, 4 pcs   Weight: 0.4 lbs........$13.10
0-1/4 Part# TAIG-1090 0-1/4" Jacobs drill chuck, industrial quality 3/8-24 thread   Weight: 0.5 lbs........$42.10
Taig Tools Jacobs Chuck Part# TAIG-1091 0-1/4" Jacobs drill chuck, commercial quality 3/8-24 thread   Weight: 0.7 lbs........$12.30
Part# TAIG-1092 1/16-3/8" Jacobs drill chuck, commercial quality 3/8-24 thread   Weight: 0.4 lbs........$12.85
Part# TAIG-1093 1/8-1/2" Jacobs drill chuck, commercial quality 3/8-24 thread   Weight: 0.5 lbs........$19.05
Lathe Cutting Tools Part# TAIG-1095 6 piece tool bit set, high speed steel, left & right, round nose, boring bar, cut off & 45 degree chamfer   Weight: 0.6 lbs........$33.10
Part# TAIG-1096 Unground tool bits 1/4" square   Weight: 0.1 lbs........$2.55
Desktop CNC Machine Tool Controllers for Servo and Stepper Motors Part# TAIG-1097A Left hand tool bit   Weight: 0.1 lbs........$6.25
Desktop CNC Machine Tool Controllers for Servo and Stepper Motors Part# TAIG-1097B Right hand tool bit   Weight: 0.1 lbs........$6.25
Desktop CNC Machine Tool Controllers for Servo and Stepper Motors Part# TAIG-1097C 45 degree Camfer tool bit   Weight: 0.1 lbs........$6.25
Desktop CNC Machine Tool Controllers for Servo and Stepper Motors Part# TAIG-1097D Round Nose tool bit   Weight: 0.1 lbs........$6.25
Desktop CNC Machine Tool Controllers for Servo and Stepper Motors Part# TAIG-1097E Boring bar tool bit   Weight: 0.1 lbs........$6.25
Desktop CNC Machine Tool Controllers for Servo and Stepper Motors Part# TAIG-1097F Cut off tool bit   Weight: 0.1 lbs........$6.25
slitting saw mount Part# TAIG-1110 Slitting saw arbor, screws directly on spindle including wrench   Weight: 0.2 lbs........$6.65
Part# TAIG-1110ER Slitting saw arbor for ER spindle with 3/8" shank   Weight: 0.4 lbs........$6.65
slitting saw Part# TAIG-1111 .032 X 2 1/2" diameter high speed slitting saw   Weight: 0.2 lbs........$14.65
Grinding wheel mount Part# TAIG-1120 Grinding wheel arbor, screws directly on spindle   Weight: 0.2 lbs........$7.10
Part# TAIG-1122 Grinding wheel set   Weight: 0.1 lbs........$7.30
Blank Arbor Part# TAIG-1130 Blank arbor 1.00" diameter screws directly on spindle (may be machined for special jobs)   Weight: 0.2 lbs........$4.90
Spindle Arbor Part# TAIG-1132 Blank arbor   Weight: 0.2 lbs........$3.30
Taig Tools Spindle Arbor For Jacobs Chucks Part# TAIG-1140 Drill chuck arbor, attaches Jacobs chucks directly on spindle 3/8-24 thread   Weight: 0.3 lbs........$11.85
Part# TAIG-1140ER Drill chuck arbor for ER spinde with 3/8" shank, attaches Jacobs chucks to ER spindle, 3/8-24 thread   Weight: 0.3 lbs........$11.65
Taig Tools Micro Lathe Drilling Tail Stock Part# TAIG-1150 Drilling tailstock, lever operated, 5/8" off set with dead center, 3/8-24 thread for drill chucks   Weight: 3 lbs........$44.60
Desktop CNC Machine Tool Controllers for Servo and Stepper Motors Part# TAIG-1151 Needle bearing center, spring loaded   Weight: 0.4 lbs........$19.20
Desktop CNC Machine Tool Controllers for Servo and Stepper Motors Part# TAIG-1152 Die holder for tailstock (will accept 13/16" and 1.00" button dies)   Weight: 0.4 lbs........$17.90
Spare Gates polyurethane vee belt (est. belt life 5000 hours) No. 3M315 12 1/2 Part# TAIG-1159 Spare Gates polyurethane vee belt (est. belt life 5000 hours) No. 3M 315 12 1/2" flat length   Weight: 0.1 lbs........$9.85
Spare Gates polyurethane vee belt (est. belt life 5000 hours) No. 3M500 20 Part# TAIG-1160 Spare Gates polyurethane vee belt (est. belt life 5000 hours) No. 3M 315 20" flat length   Weight: 0.1 lbs........$9.85
Taig Tools Pulleys & Belt Part# TAIG-1161 6 step pulley set (2 pulleys per set) 3/8" motor shaft 3M 500 belt included   Weight: 0.4 lbs........$30.25
Taig Tools Pulleys and Belt Part# TAIG-1162 6 step pulley set (2 pulleys per set) 1/2" motor shaft 3M 500 belt included   Weight: 0.4 lbs........$30.25
Extra tool post (same as supplied with lathe) Part# TAIG-1170 Extra tool post (same as supplied with lathe)   Weight: 0.2 lbs........$5.10
Back tool post, tool bit mounts upside down, 2 tools may be used at same time Part# TAIG-1171 Back tool post, tool bit mounts upside down, 2 tools may be used at same time   Weight: 0.2 lbs........$6.10
Desktop CNC Machine Tool Controllers for Servo and Stepper Motors Part# TAIG-1173 T Bar Cut-off Tool, height adjustable........$33.40
Desktop CNC Machine Tool Controllers for Servo and Stepper Motors Part# TAIG-1190 Steady rest, 3/32" to 1 1/2" capacity   Weight: 0.5 lbs........$29.60
Headstock Mount Part# TAIG-1191 Headstock Mounting Extension See Taig-200-48........$6.00
Taig Tools Micro Lathe Top Slide Part# TAIG-1200 Top slide (compound) mounts on crosslide for cutting tapers and angles with tool post   Weight: 1.2 lbs........$53.80
Lathe Radius Turner Part# TAIG-1210 Radius Turner, swings Tool bit in arc (makes balls)   Weight: 0.8 lbs........$22.30
Taig Tools Micro Lathe Milling Attachement Part# TAIG-1220 Milling attachment mounts directly on cross slide (2 X 3 3/4" table)   Weight: 2.5 lbs........$67.65
Desktop CNC Machine Tool Controllers for Servo and Stepper Motors Part# TAIG-1221 3/4-16 Chuck adaptor, adapts chuck to mill table   Weight: 0.4 lbs........$15.40
Fly Cutter Part# TAIG-1224 Fly Cutter   Weight: 0.6 lbs........$20.90
Part# TAIG-1224ER Fly Cutter for ER spindle   Weight: 0.6 lbs........$20.90
Milling vise, 1.25 Part# TAIG-1225 Milling vise, 1.25" opening X 2" wide   Weight: 1 lbs........$29.60
Part# TAIG-1230 Complete milling cutter set of 5, (1/16" to 3/16"), 2 flute double end, 3/16" shank.   Weight: 0.8 lbs........$53.40
Desktop CNC Machine Tool Controllers for Servo and Stepper Motors Part# TAIG-1230A 1/16" diameter milling cutter, 2 flute double end, 3/16" shank   Weight: 0.1 lbs........$12.45
Desktop CNC Machine Tool Controllers for Servo and Stepper Motors Part# TAIG-1230B 3/32" diameter milling cutter, 2 flute double end, 3/16" shank   Weight: 0.1 lbs........$12.45
Desktop CNC Machine Tool Controllers for Servo and Stepper Motors Part# TAIG-1230C 1/8" diameter milling cutter, 2 flute double end, 3/16" shank   Weight: 0.1 lbs........$12.45
Desktop CNC Machine Tool Controllers for Servo and Stepper Motors Part# TAIG-1230D 5/32" diameter milling cutter, 2 flute double end, 3/16" shank   Weight: 0.1 lbs........$12.45
Desktop CNC Machine Tool Controllers for Servo and Stepper Motors Part# TAIG-1230E 3/16" diameter milling cutter, 2 flute double end, 3/16" shank   Weight: 0.1 lbs........$12.45
Riser block kit for headstock and tool post (provide 6.00 swing, riser for tailstock not included) Part# TAIG-1250 Riser block kit for headstock and tool post (provide 6.00 swing, riser for tailstock not included)   Weight: 0.8 lbs........$27.15
Tailstock riser only Part# TAIG-1251 Tailstock riser only   Weight: 0.4 lbs........$22.10
Part# Taig-1260 Carriage Cross Slide Assembly, the carriage, gib, cross slide, gib, cross slide screw assembly, hand wheel, and tool post all assembled.........$67.45
1 Part# TAIG-1310 1" Spindle Wrench   Weight: 0.4 lbs........$7.60
Part# TAIG-200-00ER Mill Headstock for ER16 collets........$124.50
Part# TAIG-200-03ER ER Spindle Cartidge........$102.00
TaigTurn 2000 CR CNC Lathe factory assembled and ready to go Part# TAIG-2000CR CNC Ready Lathe is factory assembled wired up and ready to go. It has a 1/4 hp spindle motor and comes with an ER 16 spindle, 3-Jaw Chuck, 2 adjustable Tool Posts, a set of 6 ER collets and Nema 23 motor mounts. (does not include 'X' or 'Z' Axis motors, Control Box or Software)   Weight: 109 lbs........$1,200.00
Part# TAIG-200-10 Square Tubing Base   Weight: 6 lbs........$42.00
Part# TAIG-200-15 Y Axis Extrusion   Weight: 0.5 lbs........$52.50
Part# TAIG-200-16 Steel Ways (2 required)   Weight: 0.5 lbs........$12.00
Part# TAIG-200-20 Y Saddle Casting   Weight: 18 lbs........$115.00
Part# TAIG-200-21 X Axis Tapered Gib........$20.00
Part# TAIG-200-22A Z and Y-Axis CNC Leadscrew Nut, LH........$18.75
Part# TAIG-200-23A X-Axis CNC Leadscrew Nut, RH........$18.75
Part# TAIG-200-25 Y-Axis Leadscrew, LH   Weight: 1.5 lbs........$24.00
Part# TAIG-200-25A Z-Axis Leadscrew, LH........$25.00
Part# TAIG-200-26 X-Axis Leadscrew, RH, for 2018   Weight: 1.5 lbs........$26.00
Part# TAIG-200-26A X-Axis Leadscrew, RH, for 2019   Weight: 1.5 lbs........$27.00
Part# TAIG-200-27 Dial (3 Required)   Weight: 1.5 lbs........$5.00
Part# TAIG-200-28 Dial Sleeve (3 Required)   Weight: 1.5 lbs........$2.00
Part# TAIG-200-30 Dial Handcrank (3 Required)   Weight: 0.5 lbs........$6.25
Part# TAIG-200-31 Dial Handle (3 Required)........$0.75
Part# TAIG-200-32 Dial Key Way (3 Required)........$0.25
Part# TAIG-200-35 X-Axis Table, 2018........$70.00
Part# TAIG-200-35L X-Axis Long Table, 2019........$135.00
Part# TAIG-200-36 X,Y End Plate (2 Required)   Weight: 0.5 lbs........$3.25
Part# TAIG-200-40 Z Axis Column Assembly   Weight: 16 lbs........$68.00
Part# TAIG-200-41 Z Axis End Plate........$15.00
Part# TAIG-200-42 Z Axis 3" Steel Box Way........$15.00
Part# TAIG-200-43 Z Axis 1 1/4" Steel Box Way........$16.00
Part# TAIG-200-44 Z Axis Main Body........$84.00
Headstock Dovetail Mounting Plate drilled with mounting hole pattern. Part# TAIG-200-48 Headstock Dovetail Mounting Plate drilled with mounting hole pattern.........$6.00
Part# TAIG-200-50 Spindle Motor Mount Plate........$12.00
Part# TAIG-200-51 Motor Mount Post........$7.00
Part# TAIG-200-55 Spindle Motor(1/5 hp, 1750 rpm)   Weight: 7 lbs........$58.90
Part# TAIG-200-55CR Spindle Motor(1/4 hp, 3400 rpm)........$185.75
Part# TAIG-200-57 Threaded Rod Draw Bar   Weight: 7 lbs........$7.00
Part# TAIG-200-60 Spindle Headstock   Weight: 7 lbs........$117.50
Part# TAIG-200-61 Pulley Set(3/8, 5/8 & Belt)   Weight: 7 lbs........$25.80
Part# TAIG-200-70 CNC Motor Mount Tube (3 Required)   Weight: 0.5 lbs........$10.00
Part# TAIG-200-71 CNC Motor Mount accessory (3 Required)........$2.00
Part# TAIG-200-72 CNC Mounting Plate (3 Required)   Weight: 0.5 lbs........$5.00
Part# TAIG-200-74A CNC Mounting Plates (3 Required)   Weight: 0.5 lbs........$6.50
Part# TAIG-200-74B CNC Motor Coupling (3 Required)........$12.00
Part# TAIG-200-76 Bearing Block with bearings   Weight: 0.5 lbs........$12.00
Tooling Plate for mill table, 4 Part# TAIG-2010 Tooling Plate for mill table, 4" x 14" x 5/8" with 56 10-32 holes spaced 1" on center   Weight: 6 lbs........$64.00
Part# TAIG-2018CR-ER Control Ready Micro Mill, 5.5"x9.5"x6" travel, 2019 (with ER 16 SPINDLE) converted to CNC ready with Nema 23 motor mounts, adjustable bronze leadscrew nuts, and upgraded 1/4 horse power motor . Does not include stepper motors or control system.   Weight: 83 lbs........$1,125.00
Part# TAIG-2018ER Manual Micro Mill factory assembled (X travel 9 inches). With ER 16 SPINDLE. Wired up and ready to go.........$835.40
CNC READY Desktop Micro Mill with NEMA23 Motor mounts Part# TAIG-2019CR-ER Control Ready Micro Mill, 5.5"x12"x6" travel, 2019 (with ER 16 SPINDLE) converted to CNC ready with Nema 23 motor mounts, adjustable bronze leadscrew nuts, and upgraded 1/4 horse power motor . Does not include stepper motors or control system.   Weight: 83 lbs........$1,211.00
CNC READY Desktop Micro Mill with NEMA23 Motor mounts Part# TAIG-2019CR-ERM Control Ready Micro Mill, 5.5"x12"x6" travel, 2019 (with ER 16 SPINDLE) converted to CNC ready with Nema 23 motor mounts, adjustable bronze leadscrew nuts, and upgraded 1/4 horse power motor . Includes: Milling Vise, 2 End Mills, ER Collet Set - 3/8, 5/16, 1/4, 3/16, 1/8, 1/16 inch. Does not include stepper motors or control system. Comes with Manual handles installed so it is useful manually right away.   Weight: 93 lbs........$1,235.00
Part# TAIG-2019ER Manual Micro Mill factory assembled (X travel 12 inches). With ER 16 SPINDLE. Wired up and ready to go.........$970.00
Adjustable Boring Head for use on the Mill. Allows you to bore holes from approx 3/8 Part# TAIG-2035 Adjustable Boring Head for use on the Mill. Allows you to bore holes from approx 3/8" to 1 1/2". Boring head has 3/8" shank. Comes with 2 boring Bars   Weight: 0.5 lbs........$49.80
Milling vice with handcrank, 2.125 Part# TAIG-2225 Milling vice with handcrank, 2.125" opening x 2" wide........$32.50
1/4 Part# TAIG-2228 1/4" shank Edge Finder for use on the Mill   Weight: 1 lbs........$15.00
PN#TAIG-3000-LBG, Desktop Micro Mill with Gecko Powered Micro Stepping Motors Part# TAIG-3000-LBG Taig Micro Mill with Micro Step Controller and Motors. Includes: XYZ Micro Step Motor Controller with internal 40 Volt Power Supply; No Software Included; TAIG accessories - Milling Vise, 2 End Mills, ER Collet Set - 3/8, 5/16, 1/4, 3/16, 1/8, 1/16 inch   Weight: 118 lbs........$2,995.00
PN#TAIG-3000-LBGS-C, Desktop Micro Mill with Servo Motors Part# TAIG-3000-LBGS-C Taig Micro Mill with Three(3) Brushed DC servomotors, 250 line encoder coupled to Gecko 320 Servo Driver modules. 0.000050 inch movement increments on all three axis. Includes: XYZ Servo Motor Controller with Internal Power Supply; Parallel Port Step and Direction Interface; SuperCamXp with Mach3 Demo Version, All cables required, TAIG accessories - Milling Vise, 2 End Mills, ER Collet Set - 3/8, 5/16, 1/4, 3/16, 1/8, 1/16 inch   Weight: 132 lbs........$2,995.00
Desktop Mill with Servo Motors Part# TAIG-3000-LBGS-P Taig Micro Mill with ER16 Spindle and Three DC servomotors, 500 line encoder coupled to Gecko 320 Servo Driver modules. 0.000025 inch movement increments on all three axis. Includes: XYZ Servo Motor Controller with internal Power Supply; Parallel Port Step and Direction Interface; USB CamPod with SuperCamXp, All cables required, TAIG accessories - Milling Vise, 2 End Mills, ER Collet Set - 3/8, 5/16, 1/4, 3/16, 1/8, 1/16 inch   Weight: 132 lbs........$3,490.00
Mach3 Compatable Micro Mill setup Part# TAIG-3000-LBMP Taig Micro Mill with Micro Step Controller and Motors, 0.00003125 increment of movement on all three axis. Includes: EMC-XYZ-MUBX Micro Step Motor Controller with internal 24 Volt Power Supply; Parallel Port Interface, SuperCamXp for G & M Code Generation, Demonstration version of Mach3 Included; TAIG accessories - Milling Vise, 2 End Mills, ER Collet Set - 3/8, 5/16, 1/4, 3/16, 1/8, 1/16 inch   Weight: 120 lbs........$2,195.00
PN#Taig-3000-LBMU, Taig Micro Mill with USB interface to Micro Stepping Controller Part# TAIG-3000-LBMU Taig Micro Mill with Micro Step Controller and Motors, 0.00003125 increment of movement on all three axis. Includes: USB-XYZ-MUBX Micro Step Motor Controller with USB Interface and Internal 24 Volt Power Supply; SuperCamXp CNC Machine Tool Control Graphics Operating System; Spindle is 120 VAC, TAIG accessories - Milling Vise, 2 End Mills, ER Collet Set - 3/8, 5/16, 1/4, 3/16, 1/8, 1/16 inch   Weight: 120 lbs........$2,495.00
Taig Micro Mill with Servo Motors for Coordinate Movements, Fast, Smooth, Accurate, Dependable and Reliable Part# TAIG-3000-LBTS Taig Micro Mill with ER16 Spindle and Three DC servomotors, 500 line encoder, 0.000025 inch / 0.0000635 meter movement increments on all three axis. Includes:TresServo Motor Controller with internal Power Supply; USB Interface with the SuperCamXp program which is included, Three Servo Motor Cables and a USB Cable, TAIG accessories - Milling Vise, 2 End Mills, ER Collet Set - 3/8, 5/16, 1/4, 3/16, 1/8, 1/16 inch   Weight: 122 lbs........$2,995.00
Part# TAIG-300-75 Adjustable Tool Post Main Body   Weight: 1 lbs........$52.00
Part# TAIG-300-76 Tool Post Toolholder with slot to hold 3/8" tool.   Weight: 0.5 lbs........$38.00
Part# TAIG-300-77 Tool Post Toolholder with two 3/8" diameter holes to hold 3/8" dia. tools.   Weight: 0.5 lbs........$38.00
Part# TAIG-300-78 Tool Post Toolholder with two 5/8" diameter holes to hold 5/8" dia. tools.   Weight: 0.5 lbs........$38.00
Part# TAIG-6000CR CNC Ready Lathe with Ball Sctrews is factory assembled wired up and ready to go. It has a 1/4 hp spindle motor and comes with an ER 16 spindle, 3-Jaw Chuck, 2 adjustable Tool Posts, a set of 6 ER collets and Nema 23 motor mounts. (does not include 'X' or 'Z' Axis motors, Control Box or Software)........$1,625.00
Desktop CNC Machine Tool Controllers for Servo and Stepper Motors Part# TAIG-K1019 Unassembled Micro Lathe parts kit headstock pre-assembled, no machining necessary (Pulleys tailstock not included) 15" bed   Weight: 18 lbs........$175.30
Power Feed Micro Lathe Part# TAIG-L1015 Micro Lathe II basic unit with automatic power feed, factory assembled with tool post and carriage depth stop, pulley set, mounting board and powerfeed gear box (tailstock not included) 15" bed.   Weight: 18 lbs........$327.10
Part# TAIG-L1017 Micro Lathe basic unit, factory assembled with tool post and carriage depth stop (Pulleys Tailstock not included) 15" bed   Weight: 18 lbs........$214.10
Three Servo CNC Motor Controller, USB and Parallel Interface Part# TresServo-BX CNC Three Motor Servo controller with USB interface control. Includes SuperCamXp as three axis machine control software program. DB15 Female Motor Connectors.........$995.00
CNC Retrofit Bundle for Desktop Micro Mills, Taig and Sherline Part# TresServo-K3 CNC MicroMill Controller and Three(3) Brushed DC Servo Motors with Encoders and Six(6) Foot Motor Cables, and SuperCamXp for the USB interface. Each motor includes a crush proof Limit Switch.   Weight: 28 lbs........$1,495.00
Part# TresServo-PCB PFET TresServo CNC Three Motor Servo controller with USB interface control assembled and tested Printed Circuit Board.. Includes SuperCamXp as Graphical three axis machine control software program. DB15 Female Motor Connectors.........$595.00
USB ArmPod in the Black Box.  USB to Parallel Port Step and Direction CNC Motor Control Part# USB-ArmPod ArmPod is USB to Parallel Port Type Connector for XYZ Three Axis Motor Indexer for Generating Step and Direction Signals for Motor Drivers and Relay Control signals. Programable Signal Pin Assignments. Comes with SuperCamXp Machine Control Program, Windows Xp, Windows 7 and Vista Compatible CNC Machine Tool Motor Control. CAD Graphical User Interface Alternative to Mach3.   Weight: 3 lbs........$495.00
Assembled Board USB ArmPod Part# USB-ArmPod-Brd ArmPod Board Assembled and tested. It is a USB to Parallel Port Type Connector for XYZ Three Axis Motor Indexer for Generating Step and Direction Signals for Motor Drivers and Relay Control signals. Programable Signal Pin Assignments. Comes with SuperCamXp Machine Control Program, Windows Xp, Windows 7 and Vista Compatible CNC Machine Tool Motor Control. CAD Graphical User Interface Alternative to Mach3.   Weight: 3 lbs........$295.00
PN#USB-CamPod, CNC USB Motor Controller, 3 Axis XYZ, Includes SuperCamXp Part# USB-CamPod CamPod is USB to Parallel Port Type Connector for XYZ Three Axis Motor Indexer for Generating Step and Direction Signals for Motor Drivers and Relay Control signals. Comes with SuperCamXp Machine Control Program, Windows Xp, Windows 7 and Vista Compatible CNC Machine Tool Motor Control. CAD Graphical User Interface Alternative to Mach3.   Weight: 2 lbs........$495.00
More Details Part# USB-CamPod-M CamPod is USB to Parallel Port Type Connector for XYZ Three Axis Motor Indexer for Generating Step and Direction Signals for Motor Drivers and Relay Control signals. Plug and Play compatible with the MicroProto step and direction motor controllers. Comes with SuperCamXp Machine Control Program, Windows Xp, Windows 7 and Vista Compatible CNC Machine Tool Motor Control. CAD Graphical User Interface Alternative to Mach3.   Weight: 2 lbs........$495.00
PN#USB-XYY-MUBX, USB Interface, Two Y Motors are Synchronized, Terminal Block for Relay Contacts, Controller Part# USB-XYY-MUBT XYY, USB, Unipolar, 1600 Step/Rev, 3 Amp., Three(3) Motor, Two(2) Axis. Micro Step Motor Controller. The two Y motors are synchronized. Two(2) Relays with Contacts presented on Terminal Block on the Connector Panel. Internal 24 Volt 6.5 Amp. power supply, 150 Watt 120/240 switchable. In metal utility box 10 x 10 x 4 inches. USB interface. SuperCamXp Included.   Weight: 14 lbs........$1,195.00
Three(3) Motors, Two(2) Axis, Y motors Synchronized Micro Stepping CNC Controller Kit Part# USB-XYY-MUBT-K3 XYY, USB, Unipolar, 1600 Step/Rev, 3 Amp., Micro Step Motor Controller two(2) axis, drives four Unipolar motors. The two Y motors are synchronized. Two(2) Relays with Contacts presented on Terminal Block on the Connector Panel. Internal power supply, 24 Volt, 6.5 Amp., 150 Watt, 120/240 switchable. With SuperCamXp. USB interface with SuperCamXp. Three(3) motors and the cables included. USB cable included with controller. In metal utility box 10 x 10 x 4 inches.   Weight: 25 lbs........$1,295.00
Detailed Information Part# USB-XYY-MUBX XYY, USB, Unipolar, 1600 Step/Rev, 3 Amp., Three(3) Motor, Two(2) Axis. Micro Step Motor Controller. The two Y motors are synchronized. Two(2) Relays Control the Power to Two Main Power Recepticals on the Connector Panel. Internal 24 Volt 6.5 Amp. power supply, 150 Watt 120/240 switchable. In metal utility box 10 x 10 x 4 inches. USB interface. SuperCamXp Included.   Weight: 14 lbs........$1,195.00
Detailed Information Part# USB-XYY-MUBX-K3 XYY, USB, Unipolar, 1600 Step/Rev, 3 Amp., Micro Step Motor Controller two(2) axis, drives four Unipolar motors. The two Y motors are synchronized. Two(2) Control the Power to Two Main Power Recepticals on Connector Panel. Internal power supply, 24 Volt, 6.5 Amp., 150 Watt, 120/240 switchable. With SuperCamXp. USB interface with SuperCamXp. Three(3) motors and the cables included. USB cable included with controller. In metal utility box 10 x 10 x 4 inches.   Weight: 25 lbs........$1,295.00
PN#USB-XYYZ-MUBX, USB interface to Three Axis Four Motor Micro Stepping Controller Part# USB-XYYZ-MUBX XYYZ, USB, Unipolar, 1600 Step/Rev, 3 Amp., Four(4) Motor, Three(3) Axis, Step Motor Controller. Two synchronized. 1600 steps per revolution. Two(2) Relay Controlled Main Power Recepticals. With SuperCamXp. Internal 24 Volt 6.5 Amp. power supply, 150 Watt 120/240 switchable. In metal utility box 10 x 10 x 4 inches. USB interface with SuperCamXp.   Weight: 14 lbs........$1,295.00
PN#USB-XYYZ-MUBX-K4, Three(3) Axis, Four(4) Motor Micro Stepping Controller Kit Part# USB-XYYZ-MUBX-K4 XYYZ, USB, Unipolar, 1600 Step/Rev, 3 Amp., Micro Step Motor Controller, three axis, drives four Unipolar motors, the two Y motors are synchronized. Two(2) Relay Controlled Main Power Recepticals. With SuperCamXp. Internal Power Supply, 24 Volt, 6.5 Amp., 150 Watt, 120/240 Switchable. USB interface with SuperCamXp. Four(4) motors and the cables included. USB cable included with controller. In metal utility box 10 x 10 x 4 inches.   Weight: 29 lbs........$1,495.00
PN#USB-XYYZ-MUBX-K4, Three(3) Axis, Four(4) Motor Micro Stepping Controller Kit Part# USB-XYYZ-MUBX-K4B XYYZ, USB, Unipolar, 1600 Step/Rev, 3 Amp., Micro Step Motor Controller, three axis, drives four Unipolar motors, the two Y motors are synchronized. Two(2) Relay Controlled Main Power Recepticals. With SuperCamXp. Internal Power Supply, 24 Volt, 6.5 Amp., 150 Watt, 120/240 Switchable. USB interface with SuperCamXp. Four(4) motors with 3/8" shafts and 420 oz/in torque, Home Limit Switches,the ten(10) foot cables are included. USB cable included with controller. In metal utility box 10 x 10 x 4 inches.   Weight: 29 lbs........$1,695.00
PN#USB-XYZ-MUBX, USB CNC 3 Axis Micro Stepping Controller, with SuperCamXp Part# USB-XYZ-MUBX XYZ, USB, Unipolar, 1600 Step/Rev, 3 Amp., Three(3) Motor, Three(3) Axis, Micro Step Motor Controller. Two(2) Relay Controlled Main Power Recepticals. Internal 24 Volt 6.5 Amp. Power supply, 150 Watt 120/240 switchable. In metal utility box 10 x 10 x 4 inches. USB interface with SuperCamXp program.   Weight: 14 lbs........$1,195.00
XYZ, USB, Unipolar, 1600 Step/Rev, 3 Amp., Three(3) Motor, Three(3) Axis,  Step Motor Part# USB-XYZ-MUBX-K3 XYZ, USB, Unipolar, 1600 Step/Rev, 3 Amp., Three(3) Motor, Three(3) Axis, Micro Step Motor Controller. Two(2) Relay Controlled Main Power Recepticals. Internal power supply, 24 Volt, 6.5 Amp., 150 Watt, 120/240 switchable. USB interface with SuperCamXp. Three(3) 300 oz/in NEMA 23, Double 1/4 inch shafts, Stepper Motors and three(3) six(6) foot motor cables included. USB cable included with controller. In metal utility box 10 x 10 x 4 inches.   Weight: 28 lbs........$1,295.00
More Info Part# USB-YXX-MUBX YXX, USB, Unipolar, 1600 Step/Rev, 3 Amp., Three(3) Motor, Two(2) Axis. Step Motor Controller. The two X motors are synchronized. Two(2) Relays with Contacts presented on Terminal Block on the Connector Panel. Internal 24 Volt 6.5 Amp. power supply, 150 Watt 120/240 switchable. In metal utility box 10 x 10 x 4 inches. USB interface. SuperCamXp Included.   Weight: 14 lbs........$1,195.00
More Info Part# USB-YXX-MUBX-K3 YXX, USB, Unipolar, 1600 Step/Rev, 3 Amp., Micro Step Motor Controller, two(2) axis, drives three(3) Unipolar motors, the two X axis motors are synchronized. Two(2) Relays with Contacts presented on Terminal Block on the Connector Panel. Internal power supply, 24 Volt, 6.5 Amp., 150 Watt, 120/240 switchable. USB interface. SuperCamXp Included. Three(3) motors and the cables included. USB cable included with controller. In metal utility box 10 x 10 x 4 inches.   Weight: 25 lbs........$1,295.00
Part# XFMR-StepDwn Step Down Transformer for Micro Mill Spindle Motor, International voltage converter.   Weight: 4 lbs........$50.00
Items found 336 
Click on CheckBox to include in Order
- Click on 'AddToCart' to Create New Order or Add Item


Home Page at http://www.super-tech.com

http://www.super-tech.com/root/mainpricelist.asp
Copyright 2004-2006 Dennis L. Bohlke
Revised 06/01/06