Taig Micro Mill with Brushed Servo Motors Attached

Effective working area is 12 x 5 x 5 inches
Table is 18.375 Wide, 3.5 Deep
Slot Width is .25 Inch, .5625 at Bottom of Slot
20 Turnes Per Inch Lead Screws on All Axis
1/4 Horse Power Spindle Motor
Step Pulley for Setting Spindle Speed
Servo Motors on Each Axis for Coordinate Movements
Homing Limit Switches on each Axis
Taig Micro Mill with Brushed DC Servo Motors mounted for Coordinate Positioning to follow CNC toolpaths.

Servo Motor Connector Signal Pin Assignments




Home Page at http://www.super-tech.com
http://www.super-tech.com/root/tresservomill-mech.asp
Published 7/17/2017 11:26:35 AM
Copyright 2016 Dennis Bohlke