Taig Micro Mill Spindle Assembly
Taig Micro Mill Spindle Assembly
1/4 Horse Power Motor.
120 VAC Drive Voltage.
Step Pulley for setting Spindle RPM's
10600, 6700, 4200, 2600, 1650, 1050
Accepts ER16 Collets on Spindle.
Spindle runout less than 0.0005 inch.
Z Limit Switch with Stop Adjustment.
Z Lead Screw is 1/2 inch in Diameter.
Z Lead Screw has 20:1 lead, 0.050 inch.
Ball Thrust Bearings on all Lead Screws.
Power Cord with Switch on Frame.

Home Page at http://www.super-tech.com
Published 7/17/2017 11:26:36 AM
Copyright 2016 Dennis Bohlke