|Step Down Transformer for Taig Micro Mill Spindle Motor|
This transformer is used to step down the common international main power of 220 VAC to 120 VAC that is compatible with the Taig Micro Mill's 1/4 Horse Power Spindle Motor.
If your wall power outlets are 220 VAC you need this transformer to convert the voltage to the proper level for the spindle motor.
The Controller Box can be setup for either 120 VAC or 240 VAC but the spindle motor is only available in 120 VAC input voltage.
Home Page at http://www.super-tech.com
Published 7/6/2017 4:28:26 PM
Copyright 2016 Dennis Bohlke